5 Axis Continuous

5 Axis Continuous

SprutCAM has 5 axis continuous strategies, which enables to create CLData for any type of multiaxis machines. The CLData is created taking into consideration the machine scheme, which permits to avoid collisions during the machining. The CLData is created taking into

Jet Cutting

Jet Cutting Featured Image

SprutCAM enables you to create CLData for oxygen, plasma, waterjet and laser cutting. This cutting strategy provides for control of the sequence of the parts being cut out. In order to diminish thermal deformations, crosspieces are created. 1. Types of cutting

Electrical discharge machining of the contour (EDM)

Electrical discharge machining of the contour (EDM)

EDM operations permit carrying out outer and inner contour machining with the wire tilted and in the vertical position. There are also strategies for 4 axis machining with automatic, interactive and precise synchronization possibilities. SprutCAM allows development of NC codes for

SprutCAM Robot

SprutCAM Robot

SprutCAM Robot is a single environment for the offline programming (OLP) of industrial robots. An efficient robot machining solution for the rapid creation of complex, collision-free, 3D movements in native 6 or more axes code (5 to 6 axis transformations

Multi-Task Machining

Multi Task Machining Featured image

SprutCAM has the capability of programming multitask turning machines with sub spindle (MTM). It enables the creation of NC programs for simultaneous machining of several parts by multiple tools. In the modern batch production environment batch production, multi-task machines (MTM)

Turn-Milling

turning feature image

The Turn-Mill module of SprutCAM includes powerful turn-milling methods to program multi axial machining. As well as support for Multi-tasking Turn-Milling centers with live tooling which include a CNC Swiss-Type Lathe. It features an easy interface and the ability to

Turning

Turning

SprutCAM contains a full set of strategies for the turning machining of parts of any complexity. All the known turning cycles are supported. The tool paths are built taking into consideration the amount of remaining material and the cutting modes are

5 Axis Indexed Machining

5 Axis Indexed Machining

5 Axis Indexed Machining provides machining at any angle with all 2.5D and 3D machining strategies. Interactive part angle setting are based on the 3D model which excludes errors, and simplifies and accelerates the CNC production engineer’s work. The SprutCAM system

3 Axis Milling

3 Axis Milling featured image

The uniqueness of the 3D milling feature is that the tool can be moved simultaneously in line with all 3 axes of the workpiece. In order to set up these operations in SprutCAM, you will need to have a 3D model

Rotary Machining

Rotary Machining Featured Image

Rotary machining is intended for obtaining the polysurfaces of parts such as turbine blades, shoulder blades and screws as well as the details like camshafts and crankshafts. It has widespread application in the Aircraft, Automobile, Petroleum and Gas Industry and

Skip to toolbar